![]() ![]() Before a scaffold is moved, each employee on the scaffold must be made aware of the move.No employee is on any part of the scaffold that extends beyond the wheels, casters, or other supports.Does not produce a speed in excess of 1 foot per second.When power systems are used, the propelling force is :.Outrigger frames, when used, are installed on both sides of the scaffold.The height to base width ratio of the scaffold during movement is 2:1 or less, unless the scaffold is designed and constructed to meet or exceed nationally recognized stability test requirements (such as ANSI/SIA A92.5 and 92.6).The surface on which the scaffold is being moved is :.Employees are not allowed to ride on scaffolds unless the following conditions exist :.Forklifts, trucks, motor vehicles, or add-on motors must not be used to propel scaffolds unless the scaffold is designed for them. Power systems used to propel mobile scaffolds must be designed for that purpose.Manual force used to move the scaffold must be applied as close to the base as practicable, but not more than 5 feet above the supporting surface.Scaffolds shall be stabilized to prevent tipping during movement.Scaffolds constructed of fabricated frame components must also comply with the requirements of paragraph (c) of this section.Scaffolds constructed of tube and coupler components must also comply with the requirements of paragraph (b) of this section.Leveling of the scaffold, where necessary, must be achieved by the use of :.Platforms must not extend beyond the base supports of the scaffold, unless stability is ensured by :.Caster stems and wheel stems in scaffold legs or adjustment screws must be :.To prevent movement of the scaffold while it is being used in a stationary position, scaffold casters and wheels must be locked with :.All brace connections must be secured.To prevent collapse of the scaffold, to secure vertical members together laterally and to automatically square and align vertical members, scaffolds must be braced by :.Scaffolds must be plumb, level, and squared.The ZLP630 and ZLP800 are the most popular models. Our main products are including ZLP250 single person suspended platform, ZLP 500 suspended platform cradle, ZLP630 suspended scaffolding, ZLP800 suspended working platform, ZLP1000 suspended scaffold, as well as safety lock, hoist, electric control box and steel wire rope. is a leading suspended platform manufacturer and exproter in China. Aerial lifts, boatswains chair, catenary scaffold, float scaffold. Hengxiang Engineering Materials Co., Ltd. Heres a quick breakdown of OSHA fall protection requirements for other types of scaffolding. Multi-levelĪ multi-level scaffold is a two-point or multi-point adjustable suspended platform with a series of platforms at multiple levels. The platform is hung by more than two ropes from overhead supports. This type of suspended platform has wide applications at different sites, such as high building external wall cleaning, construction decoration and welding at different working heights. The swing stage scaffolding is hung by ropes or cables connected to stirrups at each end of the platform. In practical application, Two-point(swing-stage) suspended scaffolding are the most common type of suspended scaffold. The single-point adjustable suspended platform is usually used for window cleaning of a high-rise building. This type of suspended scaffolding is a platform suspended by one from an overhead support. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |